Asem Ameen QaidElectrical Engineering · UII
Home00Work01Research02Leadership03About04CV05Contact06
Electrical Engineering·Universitas Islam Indonesia

Asem AmeenQaid

Electrical Engineering Student | Embedded Hardware for Control & Energy Systems

I build electronic hardware and test it properly: microprocessor controllers, embedded protection systems and calibrated sensor measurements, mostly applied to control and energy systems.

Plate 01 · PortraitYogyakarta, ID
Portrait of Asem Ameen Qaid
DisciplineElectrical Engineering
InstitutionUII
FocusEmbedded hardware · control · energy
LeadershipPresident, UII Global
Status3rd-year undergraduate · graduating 2028
Team leadership

Led Team PowerTech (four students) at ANGEL Innovation Hackathon 2026, building an industrial energy monitoring platform: MQTT pipeline, dashboard and anomaly detection. Project

Root-cause debugging

False flame alarms traced to relay switching noise, and SIM800L brown-outs to ~2 A transmit bursts. Fixed by separating sensor and actuator power domains and adding a 1000 µF buffer capacitor. Project

Looking for

An internship or research role where I can design, build and test electronic hardware. Contact

The panel protection build on its soldered PCB
Plate 02 · Bench

Built, soldered and tested

My panel protection system, modelled from the real board. It runs the same three-state logic: sensors are polled every 2 s and the controller decides. Scroll to take it apart; drag to turn it.

AAQ-P05 · Open the project →
NormalWarningEmergency

All readings in range → green light, load connected

Temperature above threshold → yellow light, fan on, warning SMS

Smoke, gas or flame → red light, buzzer, fan, load disconnected, emergency SMS

Animation of the documented logic, not live data

Selected work

All 7 projects

Three threads, one direction

Logbook

Latest entries