Curriculum vitae
CV
Electrical Engineering Student | Embedded Hardware for Control & Energy Systems
Profile
Third-year Electrical Engineering student at Universitas Islam Indonesia (CGPA 3.75/4.00, FGLS scholar) who builds and tests electronic hardware for control and energy applications. Led a four-person team at the ANGEL Innovation Hackathon 2026 that developed an industrial energy monitoring platform (ESP32, RS485/Modbus, MQTT, anomaly detection). Hands-on experience taking designs from simulation to soldered PCB, with structured testing and root-cause debugging. Seeking internship or research opportunities in hardware design, embedded systems and control.
Education
B.Sc. Electrical EngineeringExpected 2028
Universitas Islam Indonesia, Yogyakarta - CGPA 3.75 / 4.00 · Future Global Leaders Scholarship (FGLS), 2024 – present
- Relevant coursework: Computer Systems and Microprocessors, Digital Logic Circuits (FPGA), Embedded Systems, Measurement and Instrumentation, Control Systems, Machine Learning, Artificial Intelligence
Engineering projects
Embedded Systems · final project
- Three-state (Normal, Warning, Emergency) protection system on an Arduino Nano that monitors temperature (DHT11), smoke/gas (MQ-2) and flame, and disconnects the load through a relay.
- Taken from breadboard to soldered PCB; passed all six structured test scenarios, with load disconnection within one 2-second polling cycle and SMS alerts via a SIM800L GSM module.
- Traced false flame alarms to relay switching noise and SIM800L brown-outs to ~2 A transmit bursts; fixed by separating sensor and actuator power domains and adding a 1000 µF buffer capacitor.
Industrial Energy Efficiency CopilotOct – Nov 2026
ANGEL Innovation Hackathon 2026 · Sustainable Energy track - Led Team PowerTech (four students, with a faculty supervisor) and was responsible for system integration, the dashboard and the MQTT data pipeline of a multi-site industrial energy monitoring platform.
- Software prototype with baseline-based anomaly detection, energy-intensity (IKE) analysis and forecasting; detected 3 of 3 inserted anomalies with no false alarms on a synthetic 30-day dataset.
- Acquisition unit (ESP32 with a PZEM energy meter over RS485/Modbus) designed and firmware written; hardware not yet validated.
Measurement and Instrumentation · final project part 2 (pair project)
- MPU6050 over I2C with a 21 Hz on-chip low-pass filter, a complementary filter (α = 0.98) and automatic start-up calibration of all six axes.
- Benchmarked two methods against 15 reference trials each: step counting achieved an RMSE of 0.161 m/s against 1.106 m/s for acceleration integration, explained by integration drift.
Computer System and Microprocessor · final project
- Temperature control (LM35) and over-pressure alarm (MPX4115A) written in 8086 assembly, with analog inputs digitised by an ADC0804.
- Configured an 8255 PPI in Mode 0 (control word 8AH) and used bit-masked writes so inputs and outputs could share Port C; behaved as specified in all 15 simulated test cases at 30 °C and 100 kPa (Proteus).
Personal project · ee-studio-red.vercel.app
- 37 interactive labs across 7 modules, including power systems, control systems and renewable energy; every model verified numerically before implementation and covered by 485 automated backend tests (AI-assisted development under my direction and review).
Disaster Mitigation · project
- ESP32 breadboard prototype that classifies flood risk into three levels with LED and buzzer alerts and publishes readings over MQTT to a Mosquitto broker and a Node-RED dashboard.
Measurement and Instrumentation · final project part 1
- Calibrated MQ135 (24-hour preheat, 20 kΩ load, averaged R₀) with a Python live display; measured CO₂ at 15 campus locations, from about 376 to 2,172 ppm.
Leadership
President, UII Global2026 – present
International student organisation, Universitas Islam Indonesia - Lead the executive board and cross-functional teams that run cultural, educational and networking programmes for international students across multiple faculties, coordinating with the university administration, academic departments and international partners.
Team Leader, Team PowerTech · ANGEL Innovation Hackathon 2026Oct – Nov 2026
- Ran weekly progress reviews, a shared task board, Git-based peer review and a risk register.
Marketing Team Member, UII Global2024 – 2026
- Event promotion, digital communications, social media marketing and international student engagement.
Technical skills
- Programming and Firmware: C, C++, Python, Intel 8086 assembly, Arduino IDE
- Microcontrollers and Digital Hardware: ESP32, Arduino (Nano), Intel 8086, 8255 PPI, ADC0804, digital logic design in Quartus Prime (FPGA tools), PCB assembly and soldering
- Electronics, Instrumentation and Interfaces: Sensor interfacing, analog-to-digital conversion, I2C, UART, RS485/Modbus, MQTT, GSM (AT commands), relay and transistor switching, isolated power-domain design
- Engineering Software and Simulation: MATLAB, Simulink, Proteus, Quartus Prime, Node-RED
- Testing and Engineering Analysis: Structured test scenarios, sensor calibration, digital filtering, error analysis (RMSE), simulation-based verification, numerical verification of models
Honours, memberships and languages
- First Medal, Faris Al-Ilqaa Public Speaking Competition, Riyadh (2020)
- Founding Member, Jogja SWUG (SolidWorks User Group) · Member, Google Developer Group (GDG)
- Languages: Arabic (native), English (professional working proficiency), Indonesian (intermediate)